Radio-frequency identification (RFID) allows for data transfer between tag objects to a reader via radio frequency electromagnetic fields. RFID tags are utilized by many industries for identification and tracking purposes. The RFID reader does not require line of sight to scan for data unlike bar codes and can track tags which can be embedded in objects many meters away. To this end, this paper presents a straightforward and practical approach for extending the range of RFID readers. It is shown that the range of a reader can easily be extended with a magnetodielectric slab attached to the antenna. The proper placement of the slab enhances the reader’s range by increasing the antenna’s gain. The effectiveness of the proposed implementation for the extension of the reader’s range with the magnetodielectric material has been experimentally tested. The experimental results verify the viability of the approach and show an increase of about 70% for the reader’s range.

">

RFID Reader Range Extension Using Magnetodielectric Material – An Extended Version

Wen-Cheng Lai*, An-Cheng Sun**, Nan-Wei Chen***, Ching-Wen Hsue****, Luis Galarza*****
*Department of Electronics Engineering, National Taiwan University of Science and Technology, and Department of Engineering, Ming Chi University of Technology, Taipei, Taiwan.
** Department of Chemical Engineering & Materials Science, Yuan Ze University, Jhongli, Taiwan.
*** Department of Communications Engineering, Yuan Ze University, Jhongli, Taiwan.
**** Department of Electronics Engineering, National Taiwan University of Science and Technology.
***** Department of Electrical and Computer Engineering, Florida International University.
Periodicity:December - February'2013
DOI : https://doi.org/10.26634/jele.3.2.2116

Abstract

Radio-frequency identification (RFID) allows for data transfer between tag objects to a reader via radio frequency electromagnetic fields. RFID tags are utilized by many industries for identification and tracking purposes. The RFID reader does not require line of sight to scan for data unlike bar codes and can track tags which can be embedded in objects many meters away. To this end, this paper presents a straightforward and practical approach for extending the range of RFID readers. It is shown that the range of a reader can easily be extended with a magnetodielectric slab attached to the antenna. The proper placement of the slab enhances the reader’s range by increasing the antenna’s gain. The effectiveness of the proposed implementation for the extension of the reader’s range with the magnetodielectric material has been experimentally tested. The experimental results verify the viability of the approach and show an increase of about 70% for the reader’s range.

Keywords

RFID, RFID reader, magnetodielectric material, range extension.

How to Cite this Article?

Lai, W., Sun, A., Chen, N., Hsue, C., and Galarza, L. (2013). RFID Reader Range Extension Using Magnetodielectric Material – An Extended Version. i-manager’s Journal on Electronics Engineering, 3(2), 1-6. https://doi.org/10.26634/jele.3.2.2116

References

[1]. Evdokimov, S., and G¨unther, O. (2007). Practical Access Control Management for Outsourced EPC-related Data in RFID-enabled Supply Chain, IEEE International Conference on e-Business Engineering, 331 – 336, Hong Kong.
[2]. Rajparthiban, R., Aravind, C.V., Kannan. (2009). “Development of an Active RFID Communicator for Automatic Control Applications,” 2009. 5th, International Colloquium on Signal Processing & Its Applications (CSPA), 276 – 277, Kuala Lumpur.
[3]. Xin, C. (2009). RFID Applications in Retail Industry, 2009, ISECS International Colloquium on Computing, Communication, Control, and Management, 395 – 398, Sanya.
[4]. Yan, B., and Lee, D. (2009). Application of RFID in Emu Breeding Management Information System, 2009 ISECS International Colloquium on Computing, Communication, Control, and Management, 170 – 173, Sanya.
[5]. Du, B., Wang, D., and Ju, S. (2009). Access Control for OSGi-Based Reconfigurable RFID Middleware, 2009 Fourth International Conference on Computer Sciences and Convergence Information Technology, 1010 – 1014, Seoul.
[6]. Lee, D., Kim, S., Kim, H., and Park, N. (2010). Mobile Platform for Networked RFID Applications, 2010 Seventh International Conference on Information Technology, 625 – 630, Las Vegas, NV.
[7]. http://www.ieice.org/eng/shiori/index.html
[8]. Bouet, M., and Pujolle, G. (2009). L-VIRT: a 3-D Range-Free Localization Method for RFID Tags Based on Virtual Landmarks and Mobile Readers, Consumer Communications and Networking Conference (CCNC 2009. 6th IEEE), 1 – 5, Las Vegas, NV.
[9]. Abbak, M., and Tekin, I. (2008). Microstrip Patch Antenna Array for Range Extension of RFID Applications, Antennas and Propagation Society International Symposium (AP-S 2008. IEEE), 1-4, Fac. of Eng. & Natural Sci., Sabanci Univ., Istanbul.
[10]. Hsue, C-W., and Lai, W-C. (2012). RFID Reader Range Extension using Magnetodielectric Material, 2012 3rd International Innovation and Invention Conference (IIIC), 95-96, Taipei, Taiwan.
[11]. Lai, W-C., Sun, A-C., Chen, N-W., and Hsue, C-W. (2011). Gain enhancement of planar monopole with magnetodielectric material, Progress in Electromagnetics Research, Vol. 21, 179-190.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.