References
[1]. Miyake, H.,S. Kitazawa, T. Yamada, and Y. Nagatomi,
(1997). “A miniaturised monolithic dual band filter using
ceramic lamination technique for dual mode portable
telephones”. IEEE MTT-S Int. Dig., Denver, CO, USA, Vol. 2,
pp.789-792.
[2]. L.C. Tsai and C.W. Huse, (2004). “Dual-band
bandpass filters using equal length coupled-serialshunted
lines and Z-transform technique”. IEEE Trans.
Micro. Theory Tech., Vol.52, No.4, pp. 1111-1117.
[3]. C.Y. Chen, C.Y. Hsu, and H.R. Chuang, (2006). “Design
of miniature planar dual-band filter using dual-feeding
structures and embedded resonators”. IEEE Microw.
Wireless Compon. Lett., Vol.16, No.12, pp. 669-671.
[4]. C.Y. Chen and C.Y. Hsu, (2006). “A simple and
effective method for microstrip dual-band filters design”.
IEEE Microw. Wireless Compon. Lett., Vol.16, No.3, pp.246-248.
[5]. S. Sun and L. Zhu, (2005). “Compact dual-band
microstrip bandpass filter without external feeds”. IEEE
Microw. Wireless Compon. Lett., Vol.15, No.10, pp.644-
646.
[6]. Xin Yin Zhang, Jian-Xin Chen, and Quan Xue, (2007).
“ Dual-band bandpass filter using stub-loaded
resonators”. IEEE Microwave and Wireless Components
Letters, Vol.17, No.8, pp. 583-585.
[7]. H. Zhang and K. J. Chen, (2007). “A stub tapped
branch-line coupler for dualband operations”. IEEE
Microw. Wireless Compon. Lett., Vol.17, No.2, pp.106-
108.
[8]. Makimoto, M., and Yamashita, S., (1979). “Compact
bandpass filter using stepped impedance resonators”.
Proc. IEEE, Vol.67, No. 1, pp.16-19.
[9]. W.-H. Tu and K. Chang, (2006). “Compact microstrip
bandstop filter using open stub and spurline”. IEEE Microw.
Wireless Compon. Lett., Vol.15, No.4, pp.268-270.
[10]. Jian-zhong Chen, Jie Shen, Ni Gao, and An-xue
Zhang, (2015). “Design of Compact Tri-Band Filter based
on Sir-Loaded Resonator with 0° Tapped-Feed Structure”.
De Gruyter Frequenz, Vol.69, No.9-10, pp.389-392.
